Firmware Release Notes:
WI-CGS5026_V200SP10250522：
1. Add the function of requiring password configuration during the first login (for both web and CLI).

WI-CGS5026_V200SP10241217:
1. Optimize the word for Load Balance Algorithm, change "Alogorithm" to "Algorithm".
2. Resolve issues related to EWEB proxy access in the cloud.

WI-CGS5026_V200SP10241114:
1. Optimize the cloud reporting of relevant data after Port Aggregation and display of data related to the Port Aggregation function on cloud platform devices.
2. Optimized the issue of local area network discovering functional abnormalities when configuring certain special device names.
3. Optimize the reporting of the device's own IP address in the cloud device details when using non VLAN1 interfaces for communication on the device side.
4. Optimize the login limit prompt for web page login errors exceeding five times.

WI-CGS5026_V200SP10241012：
1. Added support for configuration of multiple cloud platform functions, including: Port Protection, Storm Control, Extend, Port Rate Limit, Cable Test, and Loop Prevention. 
2. Fixed the issue where certain configuration operations caused the port to actually link up, but the software displayed this port status as down.

WI-CGS5026_V200SP10240817:
1. Optimized the stability of device connection to cloud platform and the accuracy of cloud platform topology.
2. Web page adds support for DNS configuration ( System Configuration --> IP Config ) and Dot1x ( Switch config --> AAA).
3. Solved known issues related to DHCP Server, Onvif display, Port-security, and other functions.
4. Enhanced the stability of device operation.